| Quantity: | |
|---|---|
| Name | Unit | Standard value | Note. | ||||
| Frame height | \ | 4-5 level of the floor | \ | ||||
| Frame width | m | 0.6-1.2 | Distance with the mainframe support and the building | ||||
| Support span | m | ≤6.0 | Curve or broken distance≤5.4 | ||||
| Length of cantilever | m | ＜2m，And shall not be more than 1/2 support span | / | ||||
| Average space between each hoist position | m | 4~5 | / | ||||
| The vertical spacing of the frame | m | 2 | / | ||||
| Anti-fall device | / | No less than one in any condition | The 24/7 process works with the concept of non-falling | ||||
| The minimum frame distance to the wall | mm | ≤200 | / | ||||
| Frame weight | t/m | 0.6-0.7 tons per extension meter | Each extension meter along the horizontal peri-perith | ||||
| The rate of the electric hoist | t | 7.5 | / | ||||
| Climbing speed | mm/min | 120-130 | / | ||||
| Electric hoist motor power | Kw | 0.5 | Single motor power | ||||
| Time for raise a floor | h | Normally 0.5 | Each set | ||||
| The lift control of the frame | / | Remote control | One main control, and hand on per person | ||||
| The frame simultaneously lifts the load control | / | Over or less than 30% of the fault point,it will alarm and an automatic shutdown | / | ||||
| Deviation allow for the pre-buried hold | mm | ±50 | / | ||||
| The carrying capacity of the operating layer | KN/㎡ | Two simultaneous: 3.0; Three simultaneous: 2.0 | / | ||||
| Three simultaneous: 2.0 |
| No. | Traditional scaffold | Self-climbing scaffold |
| 1 | Manual operation. More labor consuming and slow. | Efficient and safe with automatic lifting mechanism. Climbing for a floor can be achieved in 30mins. |
| | ||
| 2 | Opening workplace with great height leads to high risk of job site. | Enclose workplace minimize the risk of falling objects and job site accidents. |
| 3 | Construction process slow and lagging | No need of tower crane expedites the construction process |
| 4 | Tons of material makes messy and occupy the site | Organized material and limited extra material provide a clean job site |
| 5 | High risks of fire accidents | Nonflammable material eliminate the risk of fire |
| 6 | Complicated structure leads to great risks of hazardous operation and job site accidents. | Standard structure with closed workplace and stable operation greatly ensures job site safety. |
| Name | Unit | Standard value | Note. | ||||
| Frame height | \ | 4-5 level of the floor | \ | ||||
| Frame width | m | 0.6-1.2 | Distance with the mainframe support and the building | ||||
| Support span | m | ≤6.0 | Curve or broken distance≤5.4 | ||||
| Length of cantilever | m | ＜2m，And shall not be more than 1/2 support span | / | ||||
| Average space between each hoist position | m | 4~5 | / | ||||
| The vertical spacing of the frame | m | 2 | / | ||||
| Anti-fall device | / | No less than one in any condition | The 24/7 process works with the concept of non-falling | ||||
| The minimum frame distance to the wall | mm | ≤200 | / | ||||
| Frame weight | t/m | 0.6-0.7 tons per extension meter | Each extension meter along the horizontal peri-perith | ||||
| The rate of the electric hoist | t | 7.5 | / | ||||
| Climbing speed | mm/min | 120-130 | / | ||||
| Electric hoist motor power | Kw | 0.5 | Single motor power | ||||
| Time for raise a floor | h | Normally 0.5 | Each set | ||||
| The lift control of the frame | / | Remote control | One main control, and hand on per person | ||||
| The frame simultaneously lifts the load control | / | Over or less than 30% of the fault point,it will alarm and an automatic shutdown | / | ||||
| Deviation allow for the pre-buried hold | mm | ±50 | / | ||||
| The carrying capacity of the operating layer | KN/㎡ | Two simultaneous: 3.0; Three simultaneous: 2.0 | / | ||||
| Three simultaneous: 2.0 |
| No. | Traditional scaffold | Self-climbing scaffold |
| 1 | Manual operation. More labor consuming and slow. | Efficient and safe with automatic lifting mechanism. Climbing for a floor can be achieved in 30mins. |
| | ||
| 2 | Opening workplace with great height leads to high risk of job site. | Enclose workplace minimize the risk of falling objects and job site accidents. |
| 3 | Construction process slow and lagging | No need of tower crane expedites the construction process |
| 4 | Tons of material makes messy and occupy the site | Organized material and limited extra material provide a clean job site |
| 5 | High risks of fire accidents | Nonflammable material eliminate the risk of fire |
| 6 | Complicated structure leads to great risks of hazardous operation and job site accidents. | Standard structure with closed workplace and stable operation greatly ensures job site safety. |
